NO DISCOUNT

From the quality that you expect from Brooklyn Machine Works, a classic aluminum micro adjust seat post for railed seats. Specs: 27.2390mmBlack

Profile Racing designed Mini Cassette Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use. Hi...

The Profile Racing Chromoly Race Crankset is everything you need to run Profile cranks except the bottom bracket (which is sold separately). Cranks...

Bar end style keychain! Rep BMW while on the go!

Profile Racing designed Mini Front Hubs to be the best all around hubs available. They are suitable for trails, racing, street, and park use. Chrom...

Press in style Mid bottom brackets are for either 68mm or 73mm bottom bracket shells. Specs: Bearings (2)Tube spacer (1)Color anodized cones (2)5m...

The Holy-Grail from Brooklyn Machine Works' arsenal, the Gangsta Track frameset is the definition of quality. Built from a full 4130 steel, it's st...

These sprocket Inserts are proprietary to the Profile Sabre sprocket and Madera Signet Guard. Made from 4140 chromoly. Available to adapt your Sabr...

CNC machined from 6061 aluminum and made in the USA by Profile Racing, the Signet Guard is a unique “universal” sprocket. It uses an adapter inser...

Reintroducing the 2016 Profile Blackjack sprocket- celebrating 18 years since its inception! Same price as in 1998! Bolt on style only. -Fits 19mm,...

The Imperial sprocket is CNC'd from 6061 aluminium. Being ultra-lightweight, the Imperial sprocket is best suited for racing, dirt, or light street...

Includes LH & RH threaded cups, two bearings, tube spacer, cone spacer, and aluminum/steel spacers. Specs: -Bottom Bracket widths: 68mm, 73mm,...

Non-drive side rear hub guard from Profile. CNC machined Delrin, an ultra-strong and light plastic. Works with Madera V2 cassette, Profile Mini, El...

Profile Racing designed Elite Cassette Hubset to be the best racing hubset available! They are also suitable for trails and light park use. Color m...

Tough CNC machined delrin front hub guard from Profile Racing. Works with Madera Pilot front hubs as well as Profile Elite, Totem, and Mini front h...

Drive side rear hub guard from Profile Racing. Made from an ultra-strong and light CNC machined Delrin, the C4 Hub Guard works with Madera V2 casse...

The Push stem is named after Mark’s favorite trails. Locates bars 23mm (.9 inches) higher than the Acoustic Stem. Made from the best material with ...

The Profile Spline Drive sprocket is CNC machined from 7075 Aluminum in the USA with the same quality Profile is famed for. It requires no sprocket...

Profile Racing designed Elite Cassette Hubs to be the best racing hubs available! They are also suitable for trails and light park use. 6 pawl driv...

The perfect female axle replacement bolt made in the USA by Profile Racing. 17mm hex head bolt. Made out of chromoly. Available without an adaptor,...

Price is for 1 flush mount Bolt and washer Newer profiles use the GDH spindle, older cranks use Solid spindle. Made in USA 36g/1.26 oz

For use on frames with American BB shells. Formerly known as the American Bottom Bracket with Hop Up Kit. Gives your Profile crankset that “finishe...

With a kevlar base, fat padding, and a stitched 'P' logo, this seat is clean and comfortable. It's ready to rip.

A Kevlar base and medium padding makes this slim seat from Profile a go-to for your pivotal setup. It's clean and comfortable, with a simple 'P' lo...

THIS IS AN UPGRADE ITEM, Price only valid at time of purchase of new crankset. We will replace the standard chromo spindle with Titanium Spindle. L...

Bar end style keychain! Rep BMW while on the go!

CNC machined from 6061 Aluminum and supplied with a plated steel bolt (which takes a 5/16’s allen wrench). Anodized with a laser etched logo. 1 1/8...

4-pawl drivers for Profile Mini, Totem, Madera V2 BMX cassette hubs & Classic MTB 1-spd cassette hubs. (12t+ driver is a Splined Driver). Specs...

Vintage style, flat American Retro bottom bracket cups from Profile Racing. As with all Profile products, these are made in the USA with the highes...

The Profile Racing Sabre Universal spline drive sprocket is CNC machined from 7075 aluminum in the USA, as with all of Profile's products. It's a ...

The Elite is the stiffest crankset Profile Racing ever made!  Oversized and gusseted, the Elite arms are constructed of heat treated 4130 Chromoly....

The Profile Racing Elite Chainring is CNC machined from an aircraft quality billet 7075 aluminum plate. Chainring has offset centerline and is reve...

For use on Profile Racing's Elite crankset, this bottom bracket is 68mm wide, with either a 19mm or 22mm spindle. Made in the United States with th...

Whether you are trying to save weigh or just floss these titanium button heads bolts will certianly do the trick. CNC machined from highest qualit...

Add a set of Profile Racing Titanium GDH crank bolts to your cart with a set of Profile Racing Race cranks and we'll swap them on for you. For thos...

The DRG Machine Pumpa Knuck stem is CNC machined from 6061 billet aluminum. It comes in a 51.5mm reach and a 25.2mm rise. Black oxide treated 8mm c...

The Cambium C17 is a comfortable saddle for commuting, gravel riding and cycle touring thanks to its flexible, vulcanised-rubber top that’s ready f...

Press in style Spanish bottom brackets are for either 68mm or 73mm bottom bracket shells. Specs: Bearings (2)Tube spacer (1)Color anodized cones (...

Made in the USA chain tensioners from Profile are sold in Pairs (Right and Left) and include 2 tensioners, 4 bolts (they are 8-32 x 1-1/2”), 4 nuts...

Track Hubs are held to the same high quality standards of all other hub types that Profile Racing manufactures. Classic styling & amazing color...

The Profile Racing replacement sprocket/spider bolt will fit with all Profile products and features a standard allen key size as opposed to metric....

Profile Racing’s first version of MTB hubs were so good, they never stopped making them. Classic styling, now with an added disc brake mount. They ...

A strong and reliable replacement axle for your Profile Racing Mini Front Hub. As always, made in the USA. 

The DRG Machine Quad Saw sprocket was CNC machined from aircraft quaity 7075 aluminum. It is ultra light at only 2.9 ounces. MADE IN MAINE, USA. Sp...

 Fits the Profile Acoustic, Push, Forty, Gen 1, Lockjaw, H.I.P., All Madera stems from Profile Racing. Also works with Animal American made stems. ...